Electrical Services in Exhall
When Exhall property owners need electrical they can rely on, our Coventry team delivers fast response times, fixed quotes and workmanship that lasts.
- Local to Exhall
- Fully insured
- Free quotes
Electrical work in Exhall and neighbouring Longford, Little Heath and Holbrooks. Consumer unit upgrades, full and partial rewires, additional circuits, lighting, fault finding and periodic inspection. All work tested and certificated, with notifiable work registered as the Building Regulations require.
Working in Exhall
Exhall lies 4 miles north of Coventry city centre, in the CV7 postcode district.
Within walking distance you will find Gurdwara Dhan Dhan Baba Vadbhag Singh Ji and Gurdwara Dukh Nirwaran Sahib, and we work on properties throughout the streets around them.
The nearest areas we also cover are Longford (0.9 miles) and Little Heath (1.7 miles), so work in Exhall sits inside the same run of the city.
- Gurdwara Dhan Dhan Baba Vadbhag Singh Ji
- Gurdwara Dukh Nirwaran Sahib
- Co-op Food
- Ashcroft School
- Exhall Cedars Infant School
- Fusiliers Rest
Everything your Exhall property needs
What we cover around Gurdwara Dhan Dhan Baba Vadbhag Singh Ji and the rest of Exhall, from fault finding to periodic inspection.
Electrical Installations
Installation work from a single new circuit to a complete first and second fix, with the certificate that goes with it.
Full & Partial Rewiring
Rewiring where cable has reached the end of its life — whole property, or the sections that genuinely need it.
Lighting Installation & Upgrades
New lighting and upgrades to existing, chosen so lamps can be replaced rather than the whole fitting scrapped.
Fuse Board Upgrades
Replacing old fuse boards with modern consumer units, tested and certificated, with every circuit checked first.
Fault Finding & Repairs
Fault diagnosis and repair, with what we have ruled out explained as we go rather than at the end.
Safety Inspections & Testing (EICR)
Periodic inspection and testing, reported with clear C1, C2 and C3 coding and a plain explanation of each.
Built to last in Exhall
The equipment and methods we use on Exhall electrical work, and the reasoning behind matching them to the existing installation.
- Domestic & commercial
- Full & partial rewires
- Consumer-unit upgrades
- EICR & safety testing
- LED & smart lighting
- EV charger installation
What we check on a property in Exhall
Every quote starts with a survey. These are the things we look at on electrical work in Exhall, and why each one changes the recommendation.
What is urgent versus what is dated
Part of any inspection is separating the two. An installation can be old-fashioned without being dangerous, and we would rather say so than imply that everything of a certain age must be replaced.
Earthing and bonding
We check the main earthing conductor, the earthing arrangement at the supply, and main bonding to gas and water. Missing or undersized bonding is common in older property and is a genuine safety matter.
Cable routes and depth in walls
Cables should run in permitted zones or be mechanically protected. Cables run diagonally across a wall are a real hazard to anyone later fixing a shelf, and they are not visible without testing.
Accessibility for the people living there
Switch and socket heights, and whether isolation points can actually be reached. Worth considering whenever an installation is being altered anyway.
Existing certification
We ask what paperwork exists for previous work. Its presence or absence tells us how much of the installation has been tested before and what a new report needs to cover.
Consumer unit location and enclosure
Where the board sits, whether it is accessible, and whether it needs a non-combustible enclosure. Position matters for isolation in an emergency as much as for compliance.
Simple, transparent, no pressure
Free inspection & advice
We visit, assess the job properly and explain your options in plain English — no pressure.
Transparent fixed quote
A clear, line-by-line quote with no hidden costs. You decide in your own time.
Expert workmanship
Our qualified, insured team completes the work on time, on budget and to a high standard.
Walkthrough & tidy finish
We clean up fully — magnetic nail sweeps and all — and don't leave until you're 100% happy.
Recent electrical near Exhall
Trusted across Coventry
Electrical Services in Exhall — your questions answered
Still have a question? Our local team is happy to help — no pressure, no jargon.
Speak to us today0786 5778332How far is Exhall from your base?
Exhall is roughly 4 miles north of Coventry city centre. That is close enough that a survey can normally be arranged within a few days, and close enough that coming back afterwards is never a problem.
Do you work on properties near Gurdwara Dhan Dhan Baba Vadbhag Singh Ji?
Yes. Gurdwara Dhan Dhan Baba Vadbhag Singh Ji is one of the landmarks we use to describe where we work in Exhall, and we take on electrical jobs throughout the surrounding streets. Access and parking get checked at survey, so the quote fits the property.
Can you work on commercial premises and rental property?
Yes. We carry out EICRs and remedial work for landlords and letting agents, and inspection, testing and maintenance for commercial premises, working around trading hours where we need to. For portfolios we can schedule inspections so they do not all fall due in the same month.
What about EV charger installation?
An EV charger is a dedicated circuit with specific earthing and protection requirements, and the supply capacity has to be assessed before anything is specified — an older property with a small main fuse may need the supply upgrading first. It is notifiable work. The assessment of the existing supply is the part that most often changes the answer, so it comes first.
My RCD keeps tripping. What causes that?
Usually a genuine earth leakage somewhere, not a faulty RCD. Common sources are a failing appliance element, water in an outdoor socket or light, a damaged cable, or simply the accumulated small leakage of many appliances on one RCD tipping it over the threshold. The way to find it is systematic testing circuit by circuit, which is quicker and cheaper than replacing appliances by trial and error.
What do the C1, C2 and C3 codes on an EICR mean?
C1 is danger present — a risk of injury now, which needs making safe immediately. C2 is potentially dangerous, meaning it could become a risk and must be put right. C3 is improvement recommended: it is not dangerous and does not fail the report. An EICR is unsatisfactory if it carries any C1 or C2, or an FI meaning further investigation is required. A report that is entirely C3s is a pass.
How much do electricians cost in Exhall?
As a guide, electricians in Exhall typically charge between £45 and £90 per hour, with most jobs working out between £233 and £473 depending on complexity. Emergency call-outs are usually £80 to £100 for the first hour. We confirm pricing up front with a free, no-obligation quote and no hidden costs.
Get your free electrical quote in Exhall
Tell us about your Exhall property and our local team gets straight back to you, usually the same working day, with honest advice and a clear fixed price.
- No obligation, no pressure, no hidden costs
- Qualified, insured Coventry tradespeople
- Fast response — within 24 hours on urgent jobs